4GE+2POTS+WIFI+1USB EPON ONU

4GE+2POTS+WIFI+1USB EPON ONU is one of the series Gigabit Passive Optical Network user terminals from JIEXUN Photoelectric(Fujian) Co.,Ltd. Compliance with IEEE802.3ah standardand China Telecom EPON equipment technical requirements, it’s good at inter-operation with most of all EPON OLT in industry by support full OMCI. With cost effective, easy deployment, stable software and strong function advantages, it’s specially suitable for FTTH (Fiber to the Home), and meet the requirements of wideband accessnetwork.

send inqury

If you like this product, please share to

Detail
Specifications

Support 4094VLANs

Support 2K MAC address table, support MAC addresslimitation

Support port speed limitation, storm control, isolation and loopdetection

Support DyingGasp

Support IGMP Snooping, support CTC controllablemulticast

Support 4 priority queues scheduling with SPalgorithms

WAN connection support route mode and bridgemod

WAN connection support PPPoE, dynamic IP and static IP configuration atroute mode

Support OMCI, CLI and WEB configuration management

Support remote upgrade with OLT and local upgrade in WEB

Product Specification

Hardware Specification
Upstream	1 EPON interface, SC single-mode/single-fiber
Wavelength	Tx 1310nm, Rx 1490nm
Optical interface	SC/PC connector
Downstream	4x 10/100/1000Mbps auto adaptive Ethernet interfaces, Full Duplex/Half Duplex, RJ45 connectors 2 VOIP interface, support 4REN per pots, RJ11 connectors 1 WiFi interface, support 802.11b/g/n, 2T2R 1 USB2.0 interface, support 500mA device
Leds indicators	12 indicators, for status of power, PON port, FXS,WLAN,USB and Ethernet ports.
DC power supply	+12V, external AC-DC power adaptor
Power switch	1 Power On/Off
Power consumption	≤18W
Operating condition	Operating temp: -5 - +55℃, operating humidity:10-90%(non-condensed)
Storing condition	Storing temp: -30 - +60℃, storing humidity:10-90%(non-condensed)
Dimension	176mm（Length）* 145mm（Width）* 37mm（Height）
Net weight	<0.8kg
Software Function
PON port	Compliance withIEEE802.3ah standardand China Telecom EPON equipment technical requirements
	Support 4 priority queues scheduling with SP algorithms
	Support Dying gasp
Ethernet ports	Support MDI/MDIX
	Support ingress/egress rate limitation
	Support isolation
WLAN	Support AP mode
	Support 802.11b/g/n
	Support multiple SSIDs
	Support WPA/WPA2, WPA-PSK/WPA2-PSK
	Support ch.1-11 and auto channel
WAN	Support 4094 Vlan
	Support Bridge/Router Mode
	Support DHCP/PPPOE/Static IP
	Support Service including Internet,VOIP,IPTV and TR069
MAC Learning	Support 2K MAC address
	Support MAC limitation
	Support static MAC address
	Configurable aging time
STP	Support IEEE 802.1d (STP)
Multicast	Support IGMP Snooping
	Support 255 multicast entry
	Support IGMP v1/v2
	Support CTC controllable Snooping
QoS	Support 802.1p priority queue scheduling
QoS	Support SP scheduling algorithms
ACL	Rule according to destination IP, source IP, destination MAC, source MAC, destination protocol port number, source protocol port number, SVLAN, Ethernet type, IP priority, IP packet protocol type etc
ACL	Packet filtering according to above rules
Flow Control	Support IEEE 802.3x duplex flow control
Flow Control	Support port rate limitation
Mirroring	Support port mirroring for LAN interfaces, PON ports and CPU
Maintenance	Support configuration saving, and restore to factory configuration
	Support local upgrading through telnet and web
	Support remote upgrading from OLT
USB	Support USB1.0 USB2.0
	Support USB Host
	Support Auto Mount
VOIP	Support SIP
	Support DTMF
	Support Echo canceller
	Support G.711 a/u law, G.729, G.722
	Support VAD,CNG
	Support T.30, T.38
Management	Support local or remote CLI configuration